Grille Replacement Hood Mounted

1. Open the hood.
2. Remove the nut/washer from the back of the hood.
3. Remove the grille from the studs on the back of the hood.



4. Remove the emblem nut from the back of the grille, if required.
5. Remove the emblem from the grille.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

1. Use the nuts in order to install the emblem to the grille.

Tighten
Tighten the nuts to 2 N·m (18 lb in).




2. Install the grille to the studs at the back of the hood.
3. Install the nut/washer assemblies to the studs.

Tighten
Tighten the nuts to 5 N·m (44 lb in).

4. Close the hood.