GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2002 🢒 GMC C-Series Medium Duty Truck B7 🢒 Body and Accessories 🢒 Lighting Systems 🢒 Headlamp Replacement

Removal Procedure

    Object Number: 202581 Size: MH
  1. Remove the 2 screws (4) that hold the headlamp bezel (5).
  2. Remove the 4 screws that hold the headlamp retaining ring (7).
  3. Disconnect the headlamp electrical connector.
  4. Remove the headlamp (6) from the mounting ring (8).

Installation Procedure

    Object Number: 202581 Size: MH
  1. Connect the headlamp electrical connector.
  2. Install the headlamp (6) into the mounting ring (8).
  3. Install the headlamp retaining ring (7) with the 4 screws.

    4. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  4. Install the headlamp bezel (5) and the 4 screws (4).

    5. Tighten
    Tighten the headlamp bezel screws to 1.9 N·m (17 lb in).