Removal Procedure
- Remove the air cleaner
intake duct (4). Refer to
Air Cleaner Assembly Replacement
.
- Disconnect the mass airflow/intake air temperature (MAF/IAT) sensor
electrical connector (2). Refer to
Mass Airflow Sensor/Intake Air Temperature Sensor Replacement
.
- Grasp the air filter assembly (1)
and pull the assembly retaining pins (2) away from the retaining grommets (3)
and remove the assembly.
Installation Procedure
- Line up the retaining
pins (2) with the grommets in the mounting bracket (3).
- Install the air cleaner assembly until the air cleaner is seated
fully on the mounts and is up against the fender apron.
- Install the air cleaner
intake duct.
- Connect the MAF/IAT sensor electrical connector (2).