Tools Required
J 44402 Fuel Tank
Sending Unit Wrench
Removal Procedure
- Remove the fuel tank.
Refer to
Fuel Tank Replacement
.
- Remove fuel lines from fuel sender assembly. Refer to
Fuel Hose/Pipes Assembly Replacement
.
- Remove the fuel sender assembly retaining ring using the J 44402
.
- Remove the fuel sender assembly and the seal. Discard the seal.
- Clean the fuel sender sealing surfaces.
Installation Procedure
- Install the
new seal on the fuel tank.
Important: The fuel pump strainer must be in a horizontal position when the fuel
sender is installed in the tank. When installing the fuel sender assembly,
assure that the fuel pump strainer does not block full travel
of the float arm.
- Install the fuel sender assembly into the fuel tank.
- Install the fuel sender assembly retaining ring using the J 44402
.
- Install fuel lines to sender assembly. Refer to
Fuel Hose/Pipes Assembly Replacement
.
- Install the fuel tank. Refer to
Fuel Tank Replacement
.