1. Loosen the duct clamps (1,3) at the turbo charger inlet and the air cleaner outlet.
2. Remove the air intake duct (2) from the turbo charger inlet and the air cleaner outlet.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

Install the air intake duct (2) to the turbo charger inlet and the air cleaner outlet.

Tighten
Tighten the duct clamps (1,3) at the turbo charger inlet and the air cleaner outlet to 4 N·m (35 lb in).