GM Service Manual Online
For 1990-2009 cars only

Turn Signal Cancel Cam and Bearing Thrust Washer - Disassemble - Off Vehicle Floor shift Export

Tools Required

J 23653-SIR Lock Plate Compressor


    Object Number: 330127  Size: SH

    Important: Let the inflatable restraint steering wheel module coil hang freely after removal.

  1. Remove the inflatable restraint steering wheel module coil. Refer to Inflatable Restraint Steering Wheel Module Coil Disassemble - Off Vehicle .
  2. Compress the shaft lock shield assembly (2) using J 23653-SIR .
  3. Remove the bearing retainer (1) from the steering shaft assembly.
  4. Discard the bearing retainer (1).
  5. Remove J 23653-SIR from the steering shaft assembly.

  6. Object Number: 389656  Size: SH
  7. Remove the following parts from the steering shaft assembly:
  8. 6.1. The shaft lock shield assembly (4).
    6.2. The turn signal cancel cam assembly (3).
    6.3. The upper bearing spring (2).
    6.4. The thrust washer (1).

Turn Signal Cancel Cam and Bearing Thrust Washer - Disassemble - Off Vehicle Column Shift

Tools Required

J 23653-SIR Lock Plate Compressor

    Important: Let the inflatable restraint steering wheel module coil hang freely after removal.

  1. Remove the inflatable restraint steering wheel module coil. Refer to Inflatable Restraint Steering Wheel Module Coil Disassemble - Off Vehicle .

  2. Object Number: 664264  Size: SH
  3. Compress the cam orientation plate using J 23653-SIR .
  4. Remove the bearing retainer from the steering shaft assembly.
  5. Discard the bearing retainer.
  6. Remove J 23653-SIR .

  7. Object Number: 664282  Size: SH
  8. Remove the following parts from the steering shaft assembly:
  9. 6.1. The cam orientation plate (4).
    6.2. The turn signal cancel cam assembly (3).
    6.3. The upper bearing spring (2).
    6.4. The thrust washer (1).