Removal Procedure
- Remove the right side
C-Pillar Trim Panel. Refer to Trim Replacement - C-Pillar
in Interior Trim.
- Disconnect the electrical connector from the rear lower A/C temperature
sensor (10).
- Remove the rear lower A/C temperature sensor from the air distribution
duct.
Installation Procedure
- Install the rear lower
A/C temperature sensor (10) to the air distribution duct.
- Connect the electrical connector to the rear lower A/C temperature
sensor (10).
- Install the right side C-Pillar Trim Panel. Refer to Trim Replacement - C-Pillar
in Interior Trim.