Auto Learn Timer: The scan tool displays the seconds
used by the BCM to learn valid code from the Passlock™ sensor. The
learn procedure consists of 3 consecutive periods.
Battery Voltage: The scan tool displays the battery
system voltage.
Content Theft Lamp: The scan tool displays the state
of the SECURITY lamp. The scan tool displays ON when activated by an unauthorized
entry.
Content Theft State: The scan tool displays the state
of the content theft feature. The scan tool displays ON when activated by
an unauthorized entry.
Door Handle Switch: The scan tool displays the position
of the door handle. The scan tool displays ACTIVE when a door handle is
raised and INACTIVE with all doors closed and the door handles at rest.
Door Key Switch: The scan tool displays the state of
the door key switch. The scan tool displays ACTIVE when the switch is activated
in either door key cylinder.
Drivers Door Jamb Switch: The scan tool displays the
position of the drivers door. The scan tool displays ACTIVE when the drivers
door is open.
Ignition 1: The scan tool displays the state of the
ignition switch. The scan tool displays ACTIVE when the ignition switch
is in the RUN or CRANK position.
Ignition 3: The scan tool displays the state of the
ignition switch. The scan tool displays ACTIVE when the ignition switch
is in the RUN position.
Manufacture Enable Counter (MEC): The scan tool displays
the actual value for the MEC in the BCM. This information is for the assembly
plant only.
Module Part Number: The scan tool displays the part
number assigned to the BCM that is currently in the vehicle.
Passlock™ Code: The scan tool displays the validity
of the Passlock™ code received by the BCM. The scan tool displays
OPEN, SHORTED, TAMPER and a valid code as a numeric value (1-10).
Passlock™ Data Voltage: The scan tool displays
the voltage code from the Passlock sensor to the Body Control module (BCM).
A valid Passlock sensor voltage of 5 volts will be displayed on the scan
tool when the ignition cylinder is turned to the on position. Once the
ignition cylinder has been rotated to the crank position the Passlock voltage
will drop from 5 to 0.86-4.28 volts depending on which of the 10 possible
Passlock sensors the vehicle is equipped with. The (BCM) then determines
if the voltage received is a valid or invalid code. The scan tool will
continue to display the Passlock voltage code (0.86-4.28 volts) received
by the (BCM) when the ignition cylinder returns to the on/run
position.
Passlock™ State: The scan tool displays the state
of the Passlock™ system.
PCM/VCM in VTD Fail Enable: The scan tool displays which
state the Powertrain Control Module (PCM) is currently in for the Vehicle
Theft Deterrent (VTD).
Security Calibration Number: The scan tool displays
the security calibration part number in the BCM.
Security Lamp State: The scan tool displays the state
of the SECURITY lamp. The scan tool displays ON, OFF or FLASHING.
Security Suffix: The scan tool displays the security
identification number in the BCM.
Tamper Timer: The scan tool displays the time remaining
when in the tamper mode. The timer starts when the ignition switch is turned
to the RUN position and the BCM receives a Passlock™ data voltage
different from the last learned voltage. The timer has a delay of 10
minutes and will stay active even if the ignition switch is cycled
from the RUN to the OFF position.
VCM/PCM Fail Enable: The scan tool displays the state
of the VCM/PCM fail enable mode. The scan tool displays YES when the Passlock™
system transitions from the Monitor Passlock™ Data state to the
VCM/PCM Fail Enable state.
VCM/PCM Fuel Continue: The scan tool displays the state
of the VCM/PCM fuel continue mode. The scan tool displays YES when the Passlock™
system verifies a valid password to the BCM.
VCM/PCM Learn Timer: The scan tool displays the state
of the VCM/PCM learn timer. The scan tool displays INACTIVE when the BCM
is not in a learn mode.
VTD Fuel Disable: The scan tool displays the state of
the VTD fuel disable mode. The scan tool displays INACTIVE when the Passlock™
system verifies a valid password.
VTD Fuel Disable Until Ignition Off: The scan tool displays
the state of the VTD fuel disable until Ignition off mode. The scan tool
displays NO when the Passlock™ system verifies a valid password.
VTD Password Learn Mode: The scan tool displays the
state of the VTD password learn mode. The scan tool displays INACTIVE when
the Passlock™ system is not in a learn mode.
VTD Fuel Disable: The scan tool displays the state of
which the fuel delivery system is in.
VTD Auto Learn Timer: The scan tool displays which state
the learn timer for the VTD is currently in.
VTD Fuel Disable Until Ign. OFF: The scan tool display
the state of which the fuel delivery system is in according to the ignition
switch position.