The cruise control cable lash should be automatically set at 3.25 mm (0.128 in) with tolerance limits of 0-6 mm (0-0.2 in) when the cable is installed. If an adjustment is necessary, use the following procedure:
Notice: Do not remove the C-clip from the cruise control connector. The C-clip was not designed for removal. Damage may occur when removing.
The cruise control cable lash should be automatically set at 3.25 mm (0.128 in) with tolerance limits of 0-6 mm (0-0.2 in) when the cable is installed. If an adjustment is necessary, use the following procedure: