GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2001 🢒 GMC C Sierra - 2WD 🢒 Body and Accessories 🢒 Body Front End 🢒 Hood Primary and Secondary Latch Replacement

Removal Procedure
  1. Raise the hood.
  2. Remove the upper radiator support baffle. Refer to Radiator Air Baffle Assemblies and Deflectors .

    3. Object Number: 331323 Size: SH
  3. Remove the bolts (2) from the hood release latch (1).

    4. Object Number: 393503 Size: SH
  4. Disconnect the hood release cable end from the latch.
  5. Remove the hood release latch from the vehicle.

Installation Procedure

    Object Number: 393503 Size: SH
  1. Connect the hood release cable end to the latch.

    2. Object Number: 331323 Size: SH
  2. Install the hood latch (1) to the radiator support (3).
  3. Install the hood latch bolts (2) loosely.
  4. Adjust the hood latch height so that when the hood is closed, the hood is held securely against the front hood bumpers.

    5. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  5. Raise the hood.

    6. Tighten
    Tighten the hood latch bolts to 9 N·m (80 lb in).

  6. Adjust the front hood bumpers so that the top of the hood is flush with the fenders.
  7. Install the upper radiator support baffle. Refer to Radiator Air Baffle Assemblies and Deflectors .