GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Turn OFF the ignition.

  2. Object Number: 12817  Size: SH
  3. Disconnect the MAP sensor harness connector.

  4. Object Number: 10933  Size: SH

    Notice: Do not rotate or pry on the MAP sensor when removing. Damage to the MAP sensor or the intake manifold may result.

  5. Remove the MAP sensor by pulling straight up with a slight rocking motion.
  6. Inspect the MAP sensor seal for damage and replace as necessary.

Installation Procedure


    Object Number: 10933  Size: SH
  1. Install the MAP sensor.

  2. Object Number: 12817  Size: SH
  3. Connect the MAP sensor harness connector.