J 42371 Clutch Line Release Tool
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
2.1. | Ensure the transmission is positioned in the 3rd or 4th speed gear. |
2.2. | Rotate the transmission clockwise onto the clutch hub splines. |
2.3. | Install the 4 bolts that secure the transmission to the bell housing. |
Tighten
Tighten the bolts to 50 N·m (37 lb ft).
Tighten
• | Tighten the crossmember bolts to 50 N·m(37 lb ft). |
• | Tighten the transmission mount to transmission bolts to 50 N·m (37 lb ft). |
• | Tighten the transmission mount to crossmember nut to 45 N·m (33 lb ft). |
Tighten
Tighten the shift housing bolts to 20 N·m (15 lb ft).
Tighten
Tighten the screws to 2 N·m (18 lb in).
If required, use the shift lever adjusting nut to center the shift lever.
Tighten
Tighten the shift lever nut to 47 N·m (35 lb ft).