J 22610 Service Boot Clamp Installer
Important:
• Prior to removing the breather tube or the rack and pinion boot, mark the location of the breather tube on the gear assembly. • After removing the boot, inspect the inner tie rod for evidence of corrosion or contamination. If none is evident, continue with the repair. If corrosion or contamination is evident, replace the steering gear.
Important: The rack and pinion boot (3) must not be twisted, puckered or out of shape in any way. If the rack and pinion boot (3) is not shaped properly, adjust the rack and pinion boot (3) by hand before installing the boot clamp.