Tools Required
- Using the
J 23129
and the
J 6125-1B
, remove the prop shaft front slip yoke seal assembly (20) (model dependent).
- Remove the case extension bolts (21).
- Remove the case extension assembly (19).
- Remove the case extension seal (15).
- Remove the following components and inspect for damage and wear:
• | The output shaft seal (675) (for some models) |
• | The transmission output shaft yoke seal sleeve (682) and output shaft seal (683) (for some models) |
• | The bearing retainer ring (16), case extension ball bearing assembly (17), and bearing spacer (18) (for some models) |