Removal Procedure
- Remove the front grill
assembly. Refer to
Grille Replacement
in
Exterior Trim.
- Place a drain pan under the vehicle.
- Disconnect the transmission oil cooler lines from the auxiliary
cooler. Refer to
Transmission Fluid Cooler Hose/Pipe Replacement
.
- Remove the auxiliary oil cooler bolts (1) and push pins (2).
- Remove the auxiliary oil cooler from the vehicle.
Installation Procedure
- Install the auxiliary
oil cooler to the vehicle.
Notice: Use the correct fastener in the correct location. Replacement fasteners
must be the correct part number for that application. Fasteners requiring
replacement or fasteners requiring the use of thread locking compound or sealant
are identified in the service procedure. Do not use paints, lubricants, or
corrosion inhibitors on fasteners or fastener joint surfaces unless specified.
These coatings affect fastener torque and joint clamping force and may damage
the fastener. Use the correct tightening sequence and specifications when
installing fasteners in order to avoid damage to parts and systems.
- Install the bolts (1) and the push pins (2) that retain the auxiliary
oil cooler to the radiator brace.
Tighten
Tighten the bolts to 12 N·m (106 lb in).
- Connect the transmission oil cooler lines to the auxiliary cooler.
Refer to
Transmission Fluid Cooler Hose/Pipe Replacement
.
- Install the front grill assembly. Refer to
Grille Replacement
in Exterior Trim.
- Fill the transmission to the proper level with Dexron® III
transmission fluid. Refer to
Transmission Fluid Check
.