Install the drive belt
(1) to the drive pulleys, if equipped with dual generators and vacuum pump.
Install the drive belt
(1) over all of the pulleys except the tensioner pulley, if equipped with
a dual generators.
Install the drive belt
(1) to the drive pulleys, if equipped with a single generator and vacuum
pump.
Install the drive belt
(1) over all of the pulleys except the tensioner pulley, if equipped with
a single generator.
Slowly release the tension on the tensioner arm.
Install a 3/8 inch drive
wrench on the tensioner arm and rotate the arm counterclockwise.
Route the drive belt over tension pulley.
Slowly release the tension on the tensioner arm.
Inspect for the drive
belt being properly install on the pulleys.
Avoid mis-positioning
the drive belt by one or more grooves.
Confirm for the proper
drive belt size and the correct drive belt routing by observing the location
of the fix pointer and index marks on the drive belt tensioner. With
a new drive belt installed the fix pointer should align within the indentation
on the drive belt tensioner.
With a used drive belt
installed the fix pointer should not align past the index marks.