Removal Procedure
- Loosen the clamp (3)
on the air duct (2) at the throttle body.
- Disconnect the electrical connector from the mass air flow/intake
air temperature (MAF/IAT) sensor (4).
- Loosen the 4 fasteners (8) securing the air cleaner housing top
cover (4).
- Lift and rotate the top cover (4) of the air cleaner housing
to gain access to the air filter element.
- Lift out the air filter element (5).
- Inspect the air filter element for the following:
- Clean or replace the air filter element if required.
Installation Procedure
- Install the air filter element (5) into the air cleaner housing.
- Rotate and install the top cover (4) to the air cleaner
housing (6).
- Insert the fasteners (8) to secure the top cover.
- Connect the MAF/IAT (4)
electrical connector.
- Tighten the clamp (3) on the air duct (2) at the
throttle body.