GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2002 🢒 GMC C Sierra - 2WD 🢒 Engine 🢒 Engine Controls - 6.6L 🢒 Fuel Temperature Sensor Replacement

Removal Procedure

    Object Number: 813243 Size: SH
  1. Loosen the outlet duct clamp at the upper intake manifold cover.
  2. Remove he upper intake manifold cover from the outlet duct.
  3. Remove the upper intake manifold cover.

    4. Object Number: 664853 Size: SH
  4. Remove the turbo charged air outlet duct over the left valve cover.

    5. Object Number: 786977 Size: SH
  5. Remove the fuel temperature sensor harness connector (1).
  6. Remove the fuel temperature sensor from the fuel rail.

Installation Procedure

    Object Number: 786977 Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  1. Install the fuel temperature sensor.

    2. Tighten
    Tighten the fuel temperature sensor to 22 N·m (16 lb ft).

  2. Install the electrical connector to the sensor (1).

    3. Object Number: 664853 Size: SH
  3. Install the air turbo outlet duct.

    4. Tighten
    Tighten the duct clamps to 6 N·m (53 lb in).


    Object Number: 813243 Size: SH
  4. Install the upper intake manifold cover.
  5. Install the upper intake manifold cover to the outlet duct.
  6. Tighten the outlet duct clamp at the upper intake manifold cover.

    7. Tighten
    Tighten the clamp to 6 N·m (53 lb in).