GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 664851  Size: SH
  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection in Engine Electrical.
  2. Drain the cooling system. Refer to Cooling System Draining and Filling in Engine Cooling.
  3. Remove the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement .
  4. Remove the right turbo charged air outlet hose.

  5. Object Number: 664853  Size: SH
  6. Remove the left turbo charged air outlet hose.
  7. Remove the engine wiring harness. Refer to Engine Wiring Harness Assembly Replacement .

  8. Object Number: 791983  Size: SH
  9. Remove the fuel feed line (1).

  10. Object Number: 791996  Size: SH
  11. Remove the fuel injection pump to fuel feed block hose.

  12. Object Number: 660433  Size: SH
  13. Remove the glow plug controller. Refer to Glow Plug Relay Replacement .

  14. Object Number: 660446  Size: SH
  15. Remove the bolts from cylinder head (2), leak-off block and junction block.

  16. Object Number: 755230  Size: SH
  17. Remove the fuel line retainers.

  18. Object Number: 791904  Size: SH
  19. Remove the fuel return line assembly.

Installation Procedure


    Object Number: 791904  Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

    Important: Always install new fuel line gaskets when servicing fuel lines.

  1. Install the fuel return line assembly.
  2. Tighten
    Tighten the bolt to 27 N·m (19 lb ft).


    Object Number: 755230  Size: SH
  3. Install the fuel line retainers.
  4. Tighten
    Tighten the bolt to 16 N·m (11 lb ft).


    Object Number: 660446  Size: SH
  5. Install the bolts to the cylinder head (2), leak-off block and junction block.
  6. Tighten
    Tighten the bolts to 15 N·m (11 lb ft).


    Object Number: 660433  Size: SH
  7. Install the glow plug controller. Refer to Glow Plug Relay Replacement .

  8. Object Number: 791996  Size: SH
  9. Install the fuel injection pump to fuel feed block hose.

  10. Object Number: 791983  Size: SH
  11. Install the fuel feed line (1).
  12. Tighten
    Tighten the fuel feed line nuts to 8 N·m (70 lb in).


    Object Number: 664853  Size: SH
  13. Install the engine wiring harness assembly. Refer to Engine Wiring Harness Assembly Replacement .
  14. Install the left turbo charged air outlet hose.

  15. Object Number: 664851  Size: SH
  16. Install the right turbo charged air outlet hose.
  17. Install the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement .
  18. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection in Engine Electrical.
  19. Fill the cooling system. Refer to Cooling System Draining and Filling in Engine Cooling.