Removal Procedure
- Remove air cleaner outlet
duct. Refer to
Air Cleaner Resonator Outlet Duct Replacement
.
- Disconnect the mass air flow/intake air temperature (MAF/IAT)
sensor electrical connector (4).
- Loosen the air cleaner housing cover screws (8).
- Remove the air cleaner housing cover (4).
- Remove the air filter element (5).
- Inspect the air filter element for dust, dirt, or water. Clean
or replace the air filter element as required.
Installation Procedure
- Install the air filter element (5).
- Install the air cleaner housing cover (4).
- Tighten the air cleaner housing cover screws (8) until snug.
- Connect the MAF/IAT (4)
sensor electrical connector.
- Install air cleaner outlet duct. Refer to
Air Cleaner Resonator Outlet Duct Replacement
.