GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 674702  Size: SH
  1. Remove the air cleaner outlet duct . Refer to Air Cleaner Resonator Outlet Duct Replacement .
  2. Disconnect the mass air flow/intake air temperature (MAF/IAT) sensor electrical connector (4).
  3. Loosen the clamp securing the MAF/IAT sensor to the air cleaner assembly.
  4. Remove the MAF/IAT sensor.

  5. Object Number: 334911  Size: SH
  6. Pull up on the air cleaner assembly (1) to release the retainers from the air cleaner adaptor (2).

  7. Object Number: 369427  Size: SH
  8. Loosen the air cleaner housing cover screws (8).
  9. Remove the air cleaner housing cover (4).
  10. Remove the air filter element (5).
  11. Replace components as required.

Installation Procedure


    Object Number: 369427  Size: SH
  1. Install the air filter element (5).
  2. Install the air cleaner housing cover (4).
  3. Tighten the air cleaner housing cover screws (8) until snug.

  4. Object Number: 334911  Size: SH
  5. Position the air cleaner (1) onto the adaptor (2).
  6. Push the air cleaner (1) down onto the adaptor (2).

  7. Object Number: 359112  Size: SH

    Important: If the MAF/IAT sensor is installed backwards, the fuel system goes rich. An arrow (2) cast into the plastic portion of the sensor indicates proper air flow direction. The arrow must point toward the engine.

  8. Install the MAF/IAT sensor to the air cleaner.
  9. Tighten the clamp securing the MAF/IAT sensor to the air cleaner assembly.

  10. Object Number: 674702  Size: SH
  11. Connect the MAF/IAT sensor electrical connector (4).
  12. Install the air cleaner outlet duct . Refer to Air Cleaner Resonator Outlet Duct Replacement .