Air Conditioning Clutch Coil Removal Denso
- Remove the clutch plate
retaining bolt (1).
- Remove the clutch plate assembly.
- Remove the clutch hub/bearing snap ring.
- Remove the clutch hub/bearing assembly.
- Remove the clutch coil connector bracket retaining screw.
- Remove the clutch coil snap ring.
- Remove the clutch coil assembly.
Air Conditioning Clutch Coil Removal HT6/HD6/HU6
Tools Required
• | J 6083 External Snap Ring
Pliers |
- Remove the clutch plate and hub assembly.
Refer to
Compressor Clutch Plate/Hub Assembly Replacement
.
- Use the J 6083
in order to
remove the following components:
• | The bearing assembly retaining ring (2) |
- Install the J 33023-A
to the front head.
- Install the J 41552
down
into the inner circle of slots (1) in the rotor.
- Turn the J 41552
clockwise
in the slots in the rotor.
- Perform the following steps in order to remove the pulley rotor
and bearing assembly:
6.2. | Tighten the puller screw against the puller guide. |
6.3. | Remove the pulley rotor and bearing assembly. |
- Mark the clutch coil terminal location (1)
on the compressor front head. Refer to
Clutch Rotor and/or Bearing Removal
.
- Install the J 33023-A
on the
front head of the compressor.
- Install the J 8433-1
and
the J 33025
.
- Tighten the J 8433-3
against
the puller pilot in order to remove the clutch coil (2).