Removal Procedure
- Remove the instrument panel (I/P) bezel. Refer to
Instrument Panel Cluster Trim Plate Bezel Replacement
in Instrument Panel, Gages, and Console.
- Remove the I/P trim panel. Refer to
Instrument Panel Upper Trim Panel Replacement
in Instrument Panel, Gages, and Console.
- Remove the deflector mounting screws.
- Remove the deflector from the I/P.
Installation Procedure
- Install the deflector to the I/P.
Notice: Use the correct fastener in the correct location. Replacement fasteners
must be the correct part number for that application. Fasteners requiring
replacement or fasteners requiring the use of thread locking compound or sealant
are identified in the service procedure. Do not use paints, lubricants, or
corrosion inhibitors on fasteners or fastener joint surfaces unless specified.
These coatings affect fastener torque and joint clamping force and may damage
the fastener. Use the correct tightening sequence and specifications when
installing fasteners in order to avoid damage to parts and systems.
- Install the deflector mounting screws.
Tighten
Tighten the screw to 1.6 N·m (14 lb in).
- Install the I/P trim panel. Refer to
Instrument Panel Upper Trim Panel Replacement
in Instrument Panel, Gages, and Console.
- Install the instrument panel (I/P) bezel. Refer to
Instrument Panel Cluster Trim Plate Bezel Replacement
in Instrument Panel, Gages, and Console.