Schematic Reference: Memory Seats Schematics

DEFINITION: One or more of the memory set or recall functions are inoperative.

Did you review the Memory Seats Description and Operation?

Go to Step 2

Go to Symptoms - Seats

Attempt to set and recall memory 1 and memory 2 seat position settings.

Does the system operate normally?

Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems

Go to Step 3

1. Disconnect the memory seat module connector C3.
2. Turn the ignition ON with the engine OFF.
3. Place the vehicle in PARK.
4. Connect a test lamp from the shift lock control switch supply circuit terminal in the memory seat module harness connector to ground.

Does the test lamp illuminate?

Go to Step 4

Go to Step 11

1. Connect a test lamp from the memory 1 switch signal circuit terminal in the memory seat module harness connector to ground.
2. Press the memory 1 switch.

Does the test lamp illuminate only when the switch is pressed?

Go to Step 5

Go to Step 7

1. Connect a test lamp from the memory 2 switch signal circuit terminal in the memory seat module harness connector to ground.
2. Press the memory 2 switch.

Does the test lamp illuminate only when the switch is pressed?

Go to Step 6

Go to Step 9

1. Connect a test lamp from the memory set switch signal circuit terminal in the memory seat module harness connector to ground.
2. Press the memory SET switch.

Does the test lamp illuminate only when the switch is pressed?

Go to Step 14

Go to Step 10

1. Disconnect the memory recall switch assembly connector.
2. Connect a test lamp from the battery positive voltage supply circuit terminal in the memory recall switch assembly harness connector to ground.

Does the test lamp illuminate?

Go to Step 8

Go to Step 12

Test the memory 1 switch signal circuit for the following conditions:

Refer to Circuit Testing and to Wiring Repairs in Wiring Systems.

Did you find and correct the condition?

Go to Step 17

Go to Step 13

Test the memory 2 switch signal circuit for the following conditions:

Refer to Circuit Testing and to Wiring Repairs in Wiring Systems.

Did you find and correct the condition?

Go to Step 17

Go to Step 13

Test the memory set switch signal circuit for the following conditions:

Refer to Circuit Testing and to Wiring Repairs in Wiring Systems.

Did you find and correct the condition?

Go to Step 17

Go to Step 13

Test the shift lock control switch supply circuit to the memory seat module for an open or high resistance. Refer to Circuit Testing and to Wiring Repairs in Wiring Systems.

Did you find and correct the condition?

Go to Step 17

Go to Symptoms - Automatic Transmission Shift Lock Control in Shift Lock Control

Repair the battery voltage supply circuit to the memory recall switch assembly for an open or short to ground. Refer to Wiring Repairs in Wiring Systems.

Did you complete the repair?

Go to Step 17

--

Inspect for poor connections at the harness connector of the memory recall switch assembly. Refer to Testing for Intermittent Conditions and Poor Connections and to Connector Repairs in Wiring Systems.

Did you find and correct the condition?

Go to Step 17

Go to Step 15

Inspect for poor connections at the harness connector of the memory seat module. Refer to Testing for Intermittent Conditions and Poor Connections and to Connector Repairs in Wiring Systems.

Did you find and correct the condition?

Go to Step 17

Go to Step 16

Replace the memory recall switch assembly.

Did you complete the replacement?

Go to Step 17

--

Replace the Memory Seat Module. Refer to Memory Seat Control Module Replacement .

Did you complete the replacement?

Go to Step 17

--

Operate the Memory Seat System to verify the repair.

Did you correct the condition?

System OK

Go to Step 2