GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2002 🢒 GMC C Sierra - 2WD 🢒 Body and Accessories 🢒 Cruise Control 🢒 Cruise Control Module Replacement

Removal Procedure

    Object Number: 346973 Size: SH
  1. Remove the bolts that retain the upper fender brace assembly.
  2. Remove the upper fender brace assembly.

    3. Object Number: 346969 Size: SH
  3. Disconnect the electrical connector at the cruise control module.
  4. Remove the nuts retaining the cruise control module  to the cowl.

    5. Object Number: 346962 Size: SH
  5. Disconnect the cruise control cable from the module. Refer to Cruise Control Cable Replacement .
  6. Remove the cruise control module from the vehicle.

Installation Procedure
  1. Install the cruise control module to the vehicle.
  2. Connect the cruise control cable to the cruise control module. Refer to Cruise Control Cable Replacement .

    3. Object Number: 346962 Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the nuts in order to retain the cruise control module to the cowl.

    4. Tighten
    Tighten the nuts to 9 N·m (80 lb in).


    Object Number: 346969 Size: SH
  4. Connect the electrical connector at the cruise control module.

    5. Object Number: 346973 Size: SH
  5. Install the brace.

    6. Tighten
    Tighten the bolts to 9 N·m (80 lb in).