Radio Speaker Amplifier Replacement Base
Removal Procedure
- Lower the glove box.
- Disconnect the electrical connectors.
- Use the following steps in order to remove the amplifier from
the bracket:
3.1. | Push the retention clip upward and in. |
3.2. | Rotate the amplifier. |
3.3. | Push the amplifier up in order to clear the amplifier mounting
bracket and the HVAC module. |
3.4. | Remove the amplifier. |
Installation Procedure
- Connect the amplifier
to the bracket by clipping the amplifier into place.
- Connect the electrical connectors.
- Inspect the system operation.