Cupholder Replacement Except Pro

1. Tilt the cupholder down.
2. Remove the screws holding the cupholder to the instrument panel (I/P).
3. Remove the cupholder from the vehicle.

Notice: Refer to Fastener Notice in the Preface section.




1. Position the cupholder to the I/P.
2. Install the screws holding the cupholder to the I/P.

Tighten
Tighten the screws to 2 N·m (18 lb in).

3. Return the cupholder to the up position.

Cupholder Replacement Pro

1. Insert a flat bladed tool between the cupholder and console in order to pry the cupholder assembly out.
2. Lift the cupholder assembly slightly in order to disconnect the electrical connectors.
3. Remove the cupholder from the console.
4. Remove the switches from the cupholder assembly. Refer to Switch Replacement - Hot and Cold Cupholder .
5. Remove the screws retaining the beverage-mate to the cupholder.
6. Remove the beverage-mate.

1. Install the beverage-mate to the cupholder.

Notice: Refer to Fastener Notice in the Preface section.

2. Install the retaining screws.

Tighten
Tighten the retaining screws to 1.6 N·m (14 lb in).

3. Install the switches to the cupholder assembly. Refer to Switch Replacement - Hot and Cold Cupholder .



4. Connect the wire connectors to the switches.
5. Install the cupholder assembly to the console by pressing downwards until fully seated.