Schematic Reference: Instrument Cluster Schematics .

Did you perform the Instrument Cluster Diagnostic System Check?

--

Go to Step 2

Go to Diagnostic System Check - Instrument Cluster

Turn ON the ignition with the engine OFF.

Does the engine oil pressure indicator display in the message center?

--

Go to Step 3

Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems

1. Start the engine.
2. Check the engine oil pressure gage in the IPC.

Does the engine oil pressure gage display at or below the specified value?

0 psi (0 kPa)

Go to Engine Oil Pressure Gage Inaccurate or Inoperative

Go to Step 4

Replace the IPC. Refer to Instrument Cluster Replacement .

Did you complete the replacement?

--

Go to Step 5

--

Operate the system in order to verify the repair.

Did you correct the condition?

--

System OK

Go to Step 3