Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
Schematic Reference: Driver Information System Schematics | ||||
1 | Did you perform the Driver Information Center Diagnostic System Check? | -- | Go to Step 2 | |
2 |
Does the DIC illuminate all segments with the ignition ON? | -- | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | Go to Step 3 |
3 |
Does the DIC Run/Accy/Rap Voltage parameter indicate any voltage? | -- | Go to Step 4 | Go to Step 5 |
4 | Inspect for poor connections at the harness connector of the DIC. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 7 | Go to Step 6 |
5 | Repair the open, a short to ground or a high resistance in the RAP fuse supply voltage circuit of the DIC. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | -- | Go to Step 7 | -- |
6 | Replace the DIC. Refer to Driver Information Center Replacement . Did you complete the replacement? | -- | Go to Step 7 | -- |
7 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK | Go to Step 2 |
