Step | Action | Yes | No |
|---|---|---|---|
Schematic Reference: Exterior Lights Schematics | |||
1 | Did you perform the Lighting Diagnostic System Check? | Go to Step 2 | |
2 | Open the drivers door. Does the system operate normally? | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | Go to Step 3 |
3 | Do the courtesy lamps operate normally? | Go to Step 4 | Go to Courtesy Lamps Always On |
4 |
Do the exterior courtesy lamps come on and off with each command? | Go to Step 7 | Go to Step 5 |
5 | Disconnect the exterior courtesy lamps relay. Do the ground illumination lamps turn OFF? | Go to Step 6 | Go to Step 8 |
6 | Inspect for poor connections at the harness connector of the exterior courtesy lamps relay. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | Go to Step 11 | Go to Step 9 |
7 | Inspect for poor connections at the harness connector of the BCM. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | Go to Step 11 | Go to Step 10 |
8 | Repair the exterior courtesy lamps supply voltage circuit for a short to voltage. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | Go to Step 11 | -- |
9 | Replace the exterior courtesy lamps relay. Did you complete the replacement? | Go to Step 11 | -- |
10 |
Important: Perform the setup procedure for the BCM. Replace the BCM. Refer to Body Control Module Replacement in Body Control System. Did you complete the replacement? | Go to Step 11 | -- |
11 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 3 |
