GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the hinge pillar trim panel. Refer to Body Hinge Pillar Trim Panel Replacement .
  2. Remove the door sill plates. Refer to Front Side Door Sill Plate Replacement or to Rear Side Door Sill Plate Replacement .
  3. Remove the front seats. Refer to Front Seat Replacement - Bucket in Seats.
  4. Remove the floor storage console. Refer to Console Replacement .
  5. Remove the center seat, if equipped. Refer to Front Center Seat Replacement in Seats.
  6. Remove the control lever and the boot, if equipped. Refer to one of the following procedures in Manual Transmission:
  7. • For NV 3500, refer to Control Lever and/or Boot Replacement .
    • For NV 4500, refer to Control Lever and/or Boot Replacement .
    • For ZF S6 650, refer to Control Lever and/or Boot Replacement .
  8. Remove the rear seat if equipped. Refer to Rear Seat Replacement in Seats.
  9. Remove the jack assembly.
  10. Remove the quarter trim panel. Refer to Rear Quarter Trim Panel Replacement .
  11. Remove the lower bolt from the instrument panel (I/P) support post. Refer to Instrument Panel Carrier Replacement in Instrument Panel, Gages and Console.

  12. Object Number: 276934  Size: SH
  13. Remove the carpet from the vehicle.

Installation Procedure


    Object Number: 276934  Size: SH

    Caution: In order to avoid personal injury or vehicle damage when you repair or replace the carpet, use the same thickness and material size as the original installation. Always return the carpet to the original location.

  1. Install the carpet to the vehicle.
  2. Install the lower bolt to the I/P support post. Refer to Instrument Panel Carrier Replacement in Instrument Panel, Gages and Console.
  3. Install the rear quarter trim panel. Refer to Rear Quarter Trim Panel Replacement .
  4. Install the jack assembly.
  5. Install the rear seat if removed. Refer to Rear Seat Replacement in Seats.
  6. Install the shift lever and the boot, if equipped. Refer to one of the following procedures in Manual Transmission:
  7. • For NV 3500, refer to Control Lever and/or Boot Replacement .
    • For NV 4500, refer to Control Lever and/or Boot Replacement .
    • For ZF S6 650, refer to Control Lever and/or Boot Replacement .
  8. Install the center seat, if equipped. Refer to Front Center Seat Replacement in Seats.
  9. Install the floor storage console. Refer to Console Replacement .
  10. Install the front seats. Refer to Front Seat Replacement - Bucket in Seats.
  11. Install the door sill plates. Refer to Front Side Door Sill Plate Replacement or Rear Side Door Sill Plate Replacement .
  12. Install the hinge pillar trim panel. Refer to Body Hinge Pillar Trim Panel Replacement .