Tools Required
• | J 7057
Dial Indicator Plunger Extension |
- Attach the
J 7057
(not visible in the illustration) to the
J 8001-3
.
- Using the
J 8001-1
, mount the
J 8001-3
to the transmission case through the opening in the case barrel. Place the
J 7057
onto the direct clutch piston assembly.
- Index the
J 8001-3
. Set the dial to 0.
- Apply 80 psi of air pressure to the direct clutch fluid passage (3rd/Reverse), in the case bottom, in order to actuate the direct clutch piston. Refer to
Fluid Passages
.
- Measure the direct clutch piston travel.
Piston Travel Specification
The piston travel should be 1.27-4.369 mm (0.050-0.172 in).
- Remove the tools.