Application | Specification | |
---|---|---|
Metric | English | |
Accelerator Cable Bracket Nut/Stud | 12 N·m | 106 lb in |
Accelerator Control Cable Bracket Nut | 10 N·m | 89 lb in |
Air Cleaner Outlet Duct Clamp | 4 N·m | 35 lb in |
Air Cleaner Outlet Resonator Stud | 10 N·m | 89 lb in |
Camshaft Position (CMP) Sensor Screws | 2.2 N·m | 20 lb in |
Crankshaft Position (CKP) Sensor Bolt | 9 N·m | 80 lb in |
Distributor Hold Down Bolt | 25 N·m | 18 lb ft |
Distributor Cap Screws | 2.4 N·m | 21 lb in |
Engine Coolant Temperature (ECT) Sensor | 20 N·m | 15 lb ft |
Engine Shield Bolt | 20 N·m | 15 lb ft |
Evaporative Emission (EVAP) Canister Bracket Bolt | 25 N·m | 18 lb ft |
EVAP Canister Purge Solenoid Nut | 12 N·m | 106 lb in |
EVAP Canister Vent Valve Bracket Bolt | 12 N·m | 106 lb in |
Fuel Feed and Return Pipe Bracket Bolt | 6 N·m | 53 lb in |
Fuel Feed and Return Pipe Bracket Nut to Transmission | 25 N·m | 18 lb ft |
Fuel Feed and Return Pipes Fittings | 28 N·m | 21 lb ft |
Fuel Feed and Return Pipe Nut | 3 N·m | 27 lb in |
Fuel Injector Retainer Lock Nut | 3 N·m | 27 lb in |
Fuel Tank Ground Strap Bolt | 9 N·m | 80 lb in |
Fuel Tank Filler Housing to Body Screw | 2.3 N·m | 20 lb in |
Fuel Tank Filler Housing to Fuel Tank Fill Pipe Screw | 2.3 N·m | 20 lb in |
Fuel Tank Fill Pipe Clamp | 2.5 N·m | 22 lb in |
Fuel Line Fitting | 25 N·m | 18 lb ft |
Fuel Tank Shield Bolt | 18 N·m | 13 lb ft |
Fuel Tank Strap Bolt | 40 N·m | 30 lb ft |
Heated Oxygen Sensor (HO2S) | 42 N·m | 31 lb ft |
Idle Air Control (IAC) Valve Screw | 3 N·m | 27 lb in |
Ignition Coil Bracket Stud | 11 N·m | 97 lb in |
Ignition Module Screw | 3.5 N·m | 31 lb in |
Knock Sensor Bolt | 25 N·m | 18 lb ft |
Mass Air Flow/Intake Air Temperature (MAF/IAT) Hose Clamp | 4 N·m | 35 lb in |
Powertrain Control Module (PCM) Electrical Connector Bolt | 8 N·m | 71 lb in |
Rotor Screw | 2 N·m | 18 lb in |
Spark Plug (New AluminumHead) | 20 N·m | 15 lb ft |
Spark Plug (New Iron Head) | 30 N·m | 22 lb ft |
Spark Plug (Used Head) | 15 N·m | 11 lb ft |
Throttle Body Stud | 9 N·m | 80 lb in |
Throttle Position (TP) Sensor Screw | 2 N·m | 18 lb in |