Removal Procedure
- Remove the fuel tank. Refer to
Fuel Tank Replacement
.
- Disconnect and remove the EVAP pipe (1) from the sending unit (2), roll
over valve (3), and fuel tank clips (6).
- Cap the sending unit and roll over valve in order to prevent possible
EVAP system contamination.
Installation Procedure
- Remove the caps from the sending unit and
roll over valve.
- Install the EVAP pipe to the fuel tank.
- Install and connect the EVAP pipe (1) to the sending unit (2), roll over
valve (3), and fuel tank clips (6).
- Install the fuel tank. Refer to
Fuel Tank Replacement