-
Sidemarker Lamp
Retainer Clip
Front Turn Signal Lamp
Daytime Running Lamp
- Remove the headlamp assembly as mentioned previously.
- Press the retainer clip, located behind the turn signal housing, towards
the outside of the vehicle.
- Pull the turn signal housing out from the vehicle.
- Press the locking release lever, turn the bulb socket counterclockwise
and remove the socket from the turn signal housing.
- Remove the old bulb from the bulb socket.
- Put the new bulb into the bulb socket. Use care not to touch the bulb
with your fingers or hands.
- Put the bulb socket into the turn signal housing and turn it clockwise
until it locks.
- Reinstall the turn signal housing onto the vehicle, placing the hook and
posts on the inner side into the alignment holes, and the outer side into the retainer
bracket. Push until you hear a click.
- Reinstall the headlamp assembly.