GM Service Manual Online
For 1990-2009 cars only

Press-Fit Piston Pin


Object Number: 1310003  Size: SH

Important: 

   • The piston and connecting rod are only serviced as an assembly. If a new piston or connecting rod is required, a complete piston/connecting rod assembly must be used.
   • New connecting rod nuts must be used when the pistons are reinstalled in the engine.

Remove the piston rings (121) from the piston.

Full-Floating Piston Pin


    Object Number: 1366359  Size: SH
  1. Remove the connecting rod bearings (3) from the rod (2) and cap (4).

  2. Object Number: 490763  Size: SH
  3. Using piston ring pliers, remove the piston rings from the piston.

  4. Object Number: 1366364  Size: SH
  5. Rotate the piston pin retaining clips until the ring end gap is positioned in the cutout area (1) of the pin bore.

  6. Object Number: 1366368  Size: SH
  7. Remove the clips starting in the cutout area of the pin bore.

  8. Object Number: 35866  Size: SH
  9. Remove the pin from the piston and connecting rod.
  10. The piston and pin are a matched set and are not to be serviced separately. Mark, sort or organize the piston and matching piston pin.