GM Service Manual Online
For 1990-2009 cars only

Battery Cover Replacement 5.3L Engine w/RPO HP2

Removal Procedure


    Object Number: 1403617  Size: SH
  1. Disconnect the generator battery carrier. Refer to Hybrid Battery Service Disconnect/Connect .
  2. Remove the generator battery carrier trim cover. Refer to Battery Cover Replacement - Rear Seat .
  3. Remove the generator battery carrier intermediate cover screws.
  4. Remove the generator battery carrier intermediate cover.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1403617  Size: SH

    Important: Ensure that the generator battery carrier intermediate cover is installed between the generator battery carrier metal carrier and the 120V receptacle faceplate.

  1. Install the generator battery carrier intermediate cover.
  2. Install the generator battery carrier intermediate cover screws.
  3. Tighten
    Tighten the screws to 6 N·m (53 lb in).

  4. Connect the generator battery carrier. Refer to Hybrid Battery Service Disconnect/Connect .
  5. Install the generator battery carrier trim cover. Refer to Battery Cover Replacement - Rear Seat .