Generator Battery Carrier Battery Vent Hose Replacement 5.3L Engine w/RPO HP2

Caution: To help avoid personal injury, disable the 36V system anytime you perform service work on or around the generator battery carrier. The 36V system will still be active after you have disabled the generator battery carrier.

Caution: To help avoid personal injury, always disconnect the 36V generator battery carrier before doing any work to the generator battery carrier system. To disconnect the generator battery carrier, turn the engine off and turn OFF the service disconnect switch, which is located on the passenger side of the generator battery carrier.

1. Remove the generator battery carrier intermediate cover. Refer to Battery Cover Replacement - Rear Seat .

Important: Note the location and routing of the battery vent hose for ease of reassembly.

2. Disengage the retainers (3) securing the battery vent hose.
3. Disconnect the battery vent hose from the air duct hose (2).
4. Disconnect the battery vent hose from the batteries.
5. Remove all pieces of the battery vent hose assembly from the generator battery carrier that are required for service.

1. Position the battery vent hose assembly (1) to the generator battery carrier as noted during removal.
2. Connect the battery vent hose to the batteries.
3. Connect the battery vent hose to the air duct hose (2).
4. Engage the retainers (3) securing the battery vent hose.
5. Install the generator battery carrier intermediate cover. Refer to Battery Cover Replacement - Rear Seat .