Removal Procedure
Important: Clean all the fuel feed/return pipe connections and surrounding areas before
disconnecting the pipes in order to avoid possible fuel system contamination.
- Remove the fuel tank. Refer to
Fuel Tank Replacement
.
- Disconnect and remove the fuel feed (3) and return (2) pipes from the
sending unit and retaining clips.
- Cap the fuel feed/return and EVAP pipes in order to prevent possible fuel/EVAP
system contamination.
Installation Procedure
- Remove the caps from the fuel feed/return
and EVAP pipes.
- Install and connect the fuel feed (3) and return (2) pipes to the sending
unit and retaining clips.
- Install the fuel tank. Refer to
Fuel Tank Replacement
.