Removal Procedure
- Raise and suitably support the vehicle.
Refer to
Lifting and Jacking the Vehicle
in General Information.
- Place a suitable container under the oil pan to drain the oil into.
- Remove the oil drain plug.
- Drain the engine oil.
- Remove the oil filter.
- Inspect to ensure the engine oil filter gasket is removed.
Installation Procedure
- Lubricate the oil filter seal with clean
engine oil.
Notice: Refer to Fastener Notice in the Preface section.
- Install the oil filter.
Tighten
Tighten the oil filter after contacts plus 1 to
1¼ turn.
- Install the oil pan drain plug.
Tighten
Tighten the plug to 84 N·m (62 lb ft).
- Lower the vehicle.
- Fill the engine with the proper capacity and quality of engine oil.
- Operate the engine, check for oil leaks, and normal oil pressure.