Removal Procedure
- Disconnect the mass air flow (MAF)/intake
air temperature (IAT) sensor electrical connector (1).
- Remove the air cleaner outlet duct. Refer to
Air Cleaner Outlet Duct Replacement
.
- Grasp the air filter assembly (1) and pull
up on the assembly in order to disengage the retaining pins (2) from the grommets
(3).
Installation Procedure
- Line up the retaining pins (2) with the
grommets (3).
- Install the air cleaner assembly until the air cleaner is seated fully
on the mounts and is up against the fender apron.
- Install the air cleaner outlet duct. Refer
to
Air Cleaner Outlet Duct Replacement
.
- Connect the MAF/IAT sensor electrical connector (1).