Removal Procedure
- Remove the glow plug controller. Refer to
Glow Plug Controller Replacement
.
- Disconnect the return line from the return/junction block line.
- Remove the fuel return line clips.
- Remove the fuel injector return line from the injectors.
Installation Procedure
- Install the fuel injector return line to
the injectors.
- Install the fuel return line clips.
- Connect the return line to the return/junction block line.
- Install the glow plug controller. Refer to
Glow Plug Controller Replacement
.
- Prime the fuel system. Refer to
Fuel System Priming
.
- Start the engine. If the engine stalls, repeat the above step.
- Once the engine starts, inspect for fuel leaks.