GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2005 🢒 GMC C Sierra - 2WD 🢒 Engine 🢒 Engine Mechanical - 6.6L (LLY) 🢒 Fuel Injection Control Module Harness Assembly Installation

    Object Number: 1335560 Size: SH
  1. Install the fuel injection control module harness assembly.

    2. Object Number: 1335557 Size: SH
  2. Install the right glow plugs.

    3. Tighten
    Tighten the glow plugs to 18 N·m (13 lb ft).


    Object Number: 1335554 Size: SH
  3. Install the left glow plugs.

    4. Tighten
    Tighten the glow plugs to 18 N·m (13 lb ft).


    Object Number: 1336490 Size: SH
  4. Install the glow plug nuts.

    5. Tighten
    Tighten the glow plug nuts to 2 N·m (18 lb in).

  5. Install the glow plug controller.
  6. Install the glow plug controller bolts.

    7. Tighten
    Tighten the glow plug controller bolts to 10 N·m (89 lb in).


    Object Number: 1335549 Size: SH
  7. Install the oil level sensor harness bolt.

    8. Tighten
    Tighten the oil level sensor harness bolt to 40 N·m (29 lb ft).


    Object Number: 1335546 Size: SH
  8. Connect the oil pressure sensor electrical connector.

    9. Object Number: 1335543 Size: SH
  9. Connect the fuel rail pressure sensor.

    10. Object Number: 1335540 Size: SH

    Notice: Label all the injector electrical connectors before the connectors are removed in order to prevent reconnecting to the wrong injector. Failure to properly connect the injectors in the correct sequence will cause severe engine damage.

  10. Connect the turbocharger vane control solenoid valve.

    11. Object Number: 1335536 Size: SH
  11. Connect the fuel injector electrical connections.

    12. Object Number: 1335534 Size: SH
  12. Connect and install the turbocharger vane position sensor.

    13. Tighten
    Tighten the turbocharger vane position sensor to 23 N·m (16 lb ft).


    Object Number: 1335531 Size: SH
  13. Connect the glow plug controller electrical connector.

    14. Object Number: 1335528 Size: SH
  14. Connect the fuel temperature sensor connector.

    15. Object Number: 1335526 Size: SH
  15. Connect the oil level sensor electrical harness connector.

    16. Object Number: 1335490 Size: SH
  16. Connect the turbocharger boost sensor electrical connector.

    17. Object Number: 1335482 Size: SH
  17. Connect the fuel pressure control valve electrical connector.

    18. Object Number: 1335476 Size: SH
  18. Install the tie strap to the electrical harness.

    19. Object Number: 1335470 Size: SH
  19. Connect the crankshaft position sensor electrical connector.

    20. Object Number: 1335467 Size: SH
  20. Install the two ground bolts.

    21. Tighten
    Tighten the ground bolts to 41 N·m (30 lb ft).


    Object Number: 1335463 Size: SH
  21. Connect the EGR valve electrical connector.

    22. Object Number: 1335462 Size: SH
  22. Install the PCV pipe.

    23. Object Number: 1335460 Size: SH
  23. Install the left PCV pipe bolt.

    24. Tighten
    Tighten the PCV pipe bolt to 25 N·m (18 lb ft).


    Object Number: 1335456 Size: SH
  24. Install the right PCV pipe bolt.

    25. Tighten
    Tighten the PCV pipe bolt to 25 N·m (18 lb ft).


    Object Number: 1335454 Size: SH
  25. Connect the PCV hose clamp.

    26. Object Number: 1335450 Size: SH
  26. Install the right glow plug harness bracket bolts.

    27. Tighten
    Tighten the glow plug harness bracket bolt to 10 N·m (89 lb in).


    Object Number: 1335443 Size: SH
  27. Install the left glow plug harness bracket bolts.

    28. Tighten
    Tighten the glow plug harness bracket bolt to 10 N·m (89 lb in).