Step | Action | Yes | No |
|---|---|---|---|
Schematic Reference: Interior Lights Schematics Connector End View Reference: Lighting Systems Connector End Views or Computer/Integrating Systems Connector End Views in Computer/Integrating Systems | |||
1 | Did you perform the Diagnostic System Check - Vehicle? | Go to Step 2 | Go to Diagnostic System Check - Vehicle in Vehicle DTC Information |
2 | Operate the cargo lamp to verify the fault is present. Does the system operate normally? | Go to Testing for Electrical Intermittentsin Wiring Systems | Go to Step 3 |
3 | Disconnect the cargo lamp switch. Does the cargo lamp turn off? | Go to Step 4 | Go to Step 5 |
4 | Inspect for poor connections at the harness connector of the cargo lamp switch. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | Go to Step 7 | Go to Step 6 |
5 | Repair the short to ground in the cargo lamp low control circuit. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | Go to Step 7 | -- |
6 | Replace the cargo lamp switch. Refer to Fog Lamp and Cargo Lamp Switch Assembly Replacement. Did you complete the replacement? | Go to Step 7 | -- |
7 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 3 |
