Notice: Broken or deteriorated mounts can cause misalignment and destruction of certain drive train components. When a single mount breaks, the remaining mounts are subjected to abnormally high stresses.

1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Remove the transmission mount to crossmember nut.



3. Remove the transmission mount to transmission bolts.
4. Raise the transmission just enough in order to permit removal of the mount using a suitable transmission jack.
5. Remove the transmission mount.

Notice: Refer to Fastener Notice in the Preface section.




1. Position the transmission mount.
2. Install the transmission mount to transmission bolts.

Tighten
Tighten the transmission mount bolts to 50 N·m (37 lb ft).

3. Lower the transmission and remove the transmission jack.



4. Install the transmission mount to crossmember nut.

Tighten
Tighten the transmission mount to crossmember nut to 40 N·m (30 lb ft).

5. Lower the vehicle.