Checks
| Action
|
DEFINITION: A surging
or jerking that follows engine speed, usually more pronounced as the engine
load increases.
|
Preliminary Checks
| Refer to Important Preliminary Checks in
Symptoms - Engine Controls
.
|
Fuel System Checks
|
| • | Inspect for proper operation of the cng fuel injectors. Refer to: |
| • | Test the high and low pressure lock-off valves / circuits for proper operation. |
|
Ignition System Checks
|
| | Important:: A higher secondary ignition voltage is required to operate the vehicle on CNG than on gasoline.
|
| • | Check for proper secondary ignition system voltage output using ONLY the
J 26792
Spark Tester. |
| • | Inspect for fouled spark plugs. |
| | If fouled spark plugs are indicated the reason for the fouling must be found and corrected. |
| • | Test for faulty spark plug wires. |
| • | Test for an open ignition system ground, if equipped. |
|
Engine Mechanical Checks
| Test for proper engine operation by checking for the following:
| • | Correct engine compression |
| • | Correct engine valve timing |
| • | A worn or incorrect camshaft |
| • | Casting flash in the intake or exhaust manifold passages |
|
Additional Checks
| Inspect for electromagnetic interference (EMI) by checking for the following:
| • | Monitoring engine speed on the scan tool may indicate EMI is present. |
| | A sudden increase in scan tool engine speed while actual engine speed remains constant indicates EMI is present. |
| • | EMI on the ignition control circuit may cause a missing condition. |
|
