SMU - SECTION 9B-2 - CRUISE CONTROL. GMC Truck GMC G Van 1994

SUBJECT: SERVICE MANUAL UPDATE - SECTION 9B-2 - CRUISE CONTROL

MODELS: 1994 CHEVROLET AND GMC TRUCK G VANS WITH CRUISE CONTROL (RPO K34) EXCLUDING 6.5L DIESEL ENGINE (VIN P - RPO L49)

THIS BULLETIN CORRECTS INFORMATION THAT WAS CONTAINED IN THE 1994 G VAN SERVICE MANUAL. SECTION 9B-2, CRUISE CONTROL WHICH STATES THAT, "...THE CRUISE CONTROL MODULE IS USUALLY MOUNTED ON THE BACK OF THE INSTRUMENT PANEL NEXT TO THE STEERING COLUMN." THE CORRECT LOCATION OF THE CRUISE CONTROL MODULE IS ON THE RIGHT SIDE OF THE I/P ATTACHED TO THE FRONT HEATER CASE ASSEMBLY.

FIGURES: 0

GENERAL MOTORS BULLETINS ARE INTENDED FOR USE BY PROFESSIONAL TECHNICIANS, NOT A "DO-IT-YOURSELFER". THEY ARE WRITTEN TO INFORM THOSE TECHNICIANS OF CONDITIONS THAT MAY OCCUR ON SOME VEHICLES, OR TO PROVIDE INFORMATION THAT COULD ASSIST IN THE PROPER SERVICE OF A VEHICLE. PROPERLY TRAINED TECHNICIANS HAVE THE EQUIPMENT, TOOLS, SAFETY INSTRUCTIONS AND KNOW-HOW TO DO A JOB PROPERLY AND SAFELY. IF A CONDITION IS DESCRIBED, DO NOT ASSUME THAT THE BULLETIN APPLIES TO YOUR VEHICLE, OR THAT YOUR VEHICLE WILL HAVE THAT CONDITION. SEE A GENERAL MOTORS DEALER SERVICING YOUR BRAND OF GENERAL MOTORS VEHICLE FOR INFORMATION ON WHETHER YOUR VEHICLE MAY BENEFIT FROM THE INFORMATION.