Some 1986 C,K,G,P model trucks equipped with the 4.3L, 5.0L, 5.7L engines without air conditioning (A/C) may experience a belt squeal or popping noise from the crankshaft pulley area. These noises may be caused by a separation in the generator belt groove portion of the pulley.
If this condition is encountered, it can be repaired by replacing the pulley with a new design pulley. These pulleys were changed in production effective with the following VIN breakpoints.
G Van lordstown GMC 518113 Chevrolet 118449 Scarborough GMC 525644 Chevrolet 163060
P Detroit Assembly GMC 503976 Chassis Chevrolet 330510
New Part Quantity Number Description Application Required ------ ----------- ------------ -------- 10069912 Pulley C/K,1,2,3, 4.3L 1 (N) w/o A/C
C/K,1,2,3, 5.0L 1 (F,H) 5.7L (L,M) w/o A/C
P2,3 5.7L (M,K) 1 w/o BM3, w/o A/C
10069913 Pulley G1,2 4.3L (N) 1 w/o A/C, V05
G3 (03-05-06) 4.3L 1 (N) w/o A/C, V05
G1,2 5.OL (F,H) 1 5.7L (L) w/o A/C, V05
G3 5.7L (L,M) 1 w/o A/C, V05
General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.