GM Service Manual Online
For 1990-2009 cars only

DRIVELINE RATTLE AT 40 MPH WITH TCC ENGAGED

SUBJECT: DRIVELINE RATTLE AT 40 MPH WITH TCC ENGAGED MODELS: 1988-90 Vl, V2, Kl, K2 WITH 5.OL OR 5.7L ENGINES AND 700R4 (4L60) AUTOMATIC TRANSMISSIONS

THIS BULLETIN CANCELS AND REPLACES GMC BULLETIN 90-4A-14 (CORPORATE NUMBER 967101). ALL COPIES OF 90-4A-14 SHOULD BE DISCARDED.

Driveline rattle at 40 MPH with TCC engaged can be eliminated in V and K model vehicles with 5.OL or 5.7L gas engines and 700R4 automatic trans- missions by installing a new torque converter, part number 8650935. The new torque converter has an increased compression converter clutch spring and will eliminate the vibration which is sometimes heard as driveline rattle.

PARTS INFORMATION:

Part Number Description 8650935 torque converter

Parts are currently available through GMSPO.

WARRANTY INFORMATION:

For vehicles repaired under warranty use: LABOR OPERATION: T8145

LABOR TIME: K models 4.0 hrs. V models 3.4 hrs. ADD: With skid plate 0.2 hr.

NOTE: Labor Operation is coded to base vehicle coverage in the warranty system.

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.