LOOSENING OF HINGE AND LATCH FORM GLASS OF SWING-OUT WINDOW. GMC Truck GMC K Pickup

SOME 1988 C/K EXTENDED-CAB TRUCKS HAVE EXPERIENCED LOOSENING OF HINGES AND LATCHES GLUED ONTO THE GLASS OF THE SIDE SWING-OUT WINDOW. THE NEW WINDOWS HAVE HINGES AND LATCHES BOLTED ONTO THE GLASS. IF REPLACEMENT OF A GLUED-ON HINGE OR LATCH IS REQUIRED, ALL PARTS OF THE WINDOW (HINGE, LATCH, AND GLASS) MUST BE REPLACED. PARTS FROM THE OLD DESIGN (GLUED-ON PARTS) WINDOW ARE NOT INTERCHANGEABLE WITH PARTS FROM THE NEW (BOLT-ON PARTS) WINDOW.

REPLACEMENT PARTS FOR THE WINDOW ARE:

P/N DESCRIPTION -------- ---------------------- 15630153 LEFT GLASS (SOFT TINT) 15630154 RIGHT GLASS (SOFT TINT) 15630155 LEFT GLASS (DEEP TINT) 15630156 RIGHT GLASS (DEEP TINT) 15617822 LEFT HINGE KIT 15617823 RIGHT HINGE KIT 15617821 LATCH KIT

VEHICLES BUILT AFTER JUNE 27, 1988, VIN 2GTFK29KGJ1579148 (GMC) AND VIN 2GCHC39NXJ1288965 (CHEVROLET), ARE EQUIPPED WITH THE NEW BOLTED HINGE DESIGN.

PARTS ARE CURRENTLY AVAILABLE FROM GMSPO.

FOR REPAIRS TO VEHICLES UNDER WARRANTY USE:

LABOR OP: C0530 RIGHT SIDE C0531 LEFT SIDE

LABOR TIME: .9 HR RIGHT SIDE .7 HR LEFT SIDE

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.